FAQ

M83 Registration Punch FAQ’s

M83 Registration Punch FAQ’s

Q: How do I order new or replacement tooling for Spartanics M83 Registration Punch? A: The following information will be needed: What is the final hole size desired? What is the material being punched? What is the thickness of the material?      Our part number system is: Punches 38-171-XXX Strippers 38-172-XXX Dies 38-173-XXX The […]

Posted in: FAQ
Decorated Material Registration Feed FAQ’s

Decorated Material Registration Feed FAQ’s

Q: How can I reduce our down time? Keep the optical lens on the sensing head assembly clean.  Alcohol and a cotton swab are recommended. Check the “music wire” stabilizing components on each encoder assembly.  The wires should be tight to prevent side play in the encoders which enhances positioning accuracy. Keeping the drive wheels […]

Posted in: FAQ
600 Series Card Counters FAQ’s

600 Series Card Counters FAQ’s

Q. How do we know if our plant is wired properly for Spartanics counters? A. Check the polarity and ground of the power outlets in your facility. Hardware or electronic stores sell “line testers”. These testers are safe, easy to use and will quickly indicate if a wall outlet is properly wired. Q. What are […]

Posted in: FAQ
M930 Plastic Card Inspection System FAQ’s

M930 Plastic Card Inspection System FAQ’s

Q: What if the Warp tool is failing excessively? A: Check to see if a card has fallen onto the mirror. Adjust contrast setting in the warp tool: Open the warp tool in edit mode and adjust the contrast setting to get the best results. If the image is bright the contrast setting should be […]

Posted in: FAQ
Contact Dryer FAQ’s

Contact Dryer FAQ’s

Q. What does Spartanics need to determine the UV Dryer for our application? A. Please answer the following: 1. What is the maximum material width? 2. What is the maximum print size (width x length)? 3. What is the minimum space (gap) that is required in the direction of travel between images? 4. What is […]

Posted in: FAQ
Questions to better help Spartanics understand your specific application for Laser Die Cutting.

Questions to better help Spartanics understand your specific application for Laser Die Cutting.

1. Is the material to be laser die cut — web or sheet? 2. What type of printer are you using? 3. Are you familiar with Laser Die Cutting? 4. What type of die cutting solution do you currently use? 5. If it is sheet, what is the width and length? 6. If it is […]

Posted in: FAQ
Laser Cutting Equipment FAQ’s

Laser Cutting Equipment FAQ’s

Here are some answers to Frequently Asked Questions about laser cutting. Q: What is laser cutting and how does it work? A: Laser cutting systems use high-powered lasers to vaporize materials in their beam path. Because cut away areas are vaporized the hand labor or complicated extraction methods otherwise needed for small part scrap removal […]

Posted in: FAQ

Contact Us

RFQ