Thin Card Hot Stamping Machine – E4-PC

malahide_e4pc

The E4-PC Thin Card Hot Stamping Machine is built to handle hot stamping of paper and plastic cards that are less than .020″ thick.  The thin card hot stamping system is commonly used to apply foil stamped graphics, security holograms, signature strips, sequential numbers, and scratch-off patches.  Known for its smooth operation, the E4-PC Thin Card Hot Stamping Machine is able to quietly and accurately apply hot stamps at speeds of up to 5,000 impressions per hour.

More detailed information in regards to the E4-PC Thin Card Hot Stamping Machine’s Printing process and components can be found at the Thin Card Hot Stamping Resource Page.  In addition, general hot stamping information about artwork, dies and foils are available on the Hot Stamping Applications Page.

E4-PC Thin Card Hot Stamping Machine Specifications

Registration +/- .010″ per cycle
Dimensions 36″ wide x 36″ long x 46″ high
(9m x .9m x 1.2m)
Weight 500 lbs. uncrated, 650 lbs. crated
Power 120V, 13 AMP, 240V Optional
Card Dimensions CR-80 Cards – 2.12″ wide x 3.37″ long
(54mm x 86mm)
Card Thickness Min: .008″, Max: .020″
Stack Capacity Approx. 600 Cards
Print Engine Malahide E-Series Print Engine
Transmission All-electric CAM
Impression Area 2″ x 3.337″
(50mm x 89mm)
Speed  Max: 5,000 per hour
Average: 4,000 per hour
Stamping Pressure  8 tons nominal
Control Panel  Plug-and-play components
Temperature  Dual-mode F/C analog control 0~500 F @ +/- 1 degree
Digital Batch Counter  Up to 10,000 with auto-shutoff
Jog  Stops press in any position of print cycle
Jog Reverse  Reverses the motion of the press
Start/Stop  Push Buttons

 

THIN CARD HOT STAMPING MACHINE UPGRADES

  • 240 Electrics
  • Holographic Foil Feed
  • Sequential Numbering

Click to Download Malahide E4-PC Thin Card Machine Brochure

RFQ button

For more information on how Spartanics can provide a hot stamping solution for your specific needs, please contact us by filling out our ‘Contact Form’ or call us today  +1 (847)394-5700.

Comments are closed.

Contact Us

RFQ