Plastic Card Punching Equipment

Plastic Card Punching SystemM580 ID Plastic Card Punching System puts cutting edge machine intelligence to work to tightly synchronize lamination and card punching operations to minimize waste. Core sheets aren’t wasted when they misfeed or if a laminating film splice will be laminated over one of the core sheets. Smart controls start and stop laminating exactly at the proper time to avoid wasting core sheets. Database correlation is automatic and systems are turned off in case of data match errors.

Lighten the Load on Operators!

In the past, loosely integrated sheet feeders, laminators and die cutters required multiple highly trained and motivated operators to work. Now, the M580 makes it possible for one lightly trained operator to run the system and achieve production unsurpassed production efficiencies.

Top of the Line Plastic Card Punching Capabilities

Like all Spartanics Plastic Card Punching Systems, the M580 ID Card Punching System delivers consistent high precision registration accuracy in X, Y and Rotational axes within +/-0.1 mm or better at 150 strokes per minute.

Features & Benefits

Integrated Smart Controls:

  • Allows single lightly trained operator to run system at unsurpassed production efficiency.

Real Time Database Verification:

  • Automatic stop of the system in case of out of sequence data, duplicate or invalid data and other data mismatch errors.

Misfeed Detector:

  • Pauses system to prevent misfed sheets from entering the laminator. Automatically stops if core sheet is missing and restarts when next core sheet becomes available

Smart Laminator Controls:

  • Prevents cold laminator or distorted lamination. Tightly synchronizes lamination with core sheet availability.

Film Detector:

  • Eliminates lamination of splices onto core sheets. Automatically stops system when laminate film supply is low or before broken film enters the laminator.

Precise registration in X, Y, and Rotation axes with every press stroke:

  • Unsurpassed cut-to-print registration accuracy (+/-0.1 mm or better).

Handles wide range of core stock and security laminates:

  • Virtually unlimited ability to efficiently produce cards made from wide range of paper and plastic materials with multilayered security features and security laminates.

Dies specially designed for cutting Teslin® and paper:

  • Unsurpassed card edge quality

Extra long-life male/female dies:

  • Lowest cost per cut boosts bottom line.

Equipment Loaner Modules provided at no cost:

  • No downtime during servicing.

Multilingual and graphic icon touch screen:

  • Easy-to-use with minimal operator training.

Give your competition the 10-UP Challenge with Spartanics M560 Plastic Card Punching System!

Drive costs down while you crank up output to unprecedented levels. Configure your M560 Plastic Card Punching System with 6-7-8-9-10-Up dies as the job and your production schedule require. At up to 165 strokes per minute, you get consistent precision registration accuracy in X, Y, and Rotational axes within +/-0.1 mm or better.

The unique feature of re-registering in all 3 axes at every press stroke makes the M560 Plastic Card Punching System and all other M500 models the world’s highest precision blanking systems—within the two hairs width that the human eye can see. Registration precision does not get any better than this!

Long life male/female dies give you millions of hits and can be resharpened 18 – 20 times to give you millions of hits more. These are the world’s best value hard tools. You get the lowest cost per cut possible. For standardized male/female dies, you get quick delivery of emergency back up dies whenever needed.

Spartanics Universal Die Holder™ lets you interchange standard male/female tooling with progressive dies, compound dies, steel rule dies, and dies from any manufacturer.

Add to this die versatility, the M560’s Plastic Card Punching System inherent design flexibility to efficiently interchange coil or sheet feed, and a wide array of output modules for a maximum efficiency in parts extraction.

Punching downtime becomes a thing of the past. Spartanics M560 modules can be easily removed for servicing and replaced with loaner modules provided by Spartanics at no cost.

 

Features & Benefits

Accommodates 6-7-8-9- or 10-Up dies:

  • Outputs up to 70,000 cards per hour

Electro-optical sensors scan registration marks at up to 165 strokes/minute:

  • Highest production outputs

Precise registration in X, Y, and Rotation axes with every press stroke:

  • Unsurpassed cut-to-print registration accuracy (+/- 0.1mm or better)

Accommodates wide variety of tooling options and tooling from all major manufacturers:

  • Utilizes steel rule dies, male-female hard tool dies, progressive hard tool dies, and compound hard tool dies–provides versitility to create simple or complex and multi-featured die designs

Modular design accommodates coil or sheet feed and a wide range of input and output mechanisms:

  • Flexibility for changing job requirements. Handles sheeted materials up to 730 mm (29”) x 760 mm (30”) and coiled materials up to 760 mm (30”)

Handles wide range of paper and plastic materials:

  • Virtually unlimited capabilities to handle jobs for diverse markets

Computer storage of jobs and automatic re-positioning of steel rule dies:

  • Quick changeovers with minimal scrap

Multilingual and graphic icon touch screen:

  • Easy-to-use with minimal operator training

Extra long-life male/female dies:

  • Lowest cost per cut boosts bottom line

Superior edge quality from proprietary die designs:

  • Superior edge quality means lower costs from reduced rejects

Fully automated handling mechanisms for input and finished parts including the optional Magazine Loading capability:

  • Scratch-free products

Equipment loaner modules provided at no cost:

  • No downtime during servicing

Pre-set batch counts:

  • Efficient operation with minimal operator intervention

 


Registration precision does not get any better than this with Spartanics M535 Plastic Card Punching System!

Configure your M535 Plastic Card Punching System with 3-Up, 4-Up or 5-Up dies as the job and your production schedule require. At up to 165 strokes per minute, you get consistent precision registration accuracy in 3 axes (X, Y, Rotation) within +/- 0.1 mm or better.

The unique feature of re-registering in all 3 axes at every press stroke makes the M535 Plastic Card Punching System and all other M500 models the world’s highest precision blanking systems—within the two hair’ width that the human eye can see. Registration precision does not get any better than this!

Long life male/female dies give you millions of hits and can be re-sharpened to give you millions of hits more. These are the world’s best value hard tools. You get the lowest cost per cut possible. For standardized male/female dies, you get quick delivery of emergency back up dies whenever needed.

Spartanics Universal Die Holder™ lets you interchange standard male/female tooling with progressive dies, compound dies, steel rule dies, and dies from any manufacturer.

Add to this die versatility, the M535 Plastic Card Punching System’s inherent design flexibility to efficiently interchange coil or sheet feed, and a wide array of output modules for a maximum efficiency in parts extraction.

Punching downtime becomes a thing of the past. Spartanics M535 Plastic Card Punching System modules can be easily removed for servicing and replaced with loaner modules provided by Spartanics at no cost.

Features & Benefits

Accommodates 3-Up, 4- Up or 5-Up dies:

  • Outputs up to 35,000 cards per hour

Electro-optical sensors scan registration marks at up to 165 strokes/minute:

  • Highest production outputs

Precise registration in X, Y, and Rotation axes with every press stroke:

  • Unsurpassed cut-to-print registration accuracy (+/- 0.1mm or better)

Accommodates wide variety of tooling options and tooling from all major manufacturers:

  • Utilizes steel rule dies, male-female hard tool dies, progressive hard tool dies, and compound hard tool dies–provides versitility to create simple or complex and multi-featured die designs

Modular design accommodates coil or sheet feed and a wide range of input and output mechanisms:

  • Flexibility for changing job requirements. Handles sheeted materials up to 730 mm (29”) x 760 mm (30″)

Handles wide range of paper and plastic materials:

  • Virtually unlimited capabilities to handle jobs for diverse markets

Computer storage of jobs and automatic re-positioning of steel rule dies:

  • Quick changeovers with minimal scrap

Multilingual and graphic icon touch screen:

  • Easy-to-use with minimal operator training

Extra long-life male/female dies:

  • Lowest cost per cut boosts bottom line

Superior edge quality from proprietary die designs:

  • Superior edge quality means lower costs from reduced rejects

Fully automated handling mechanisms for input and finished parts including the optional Magazine Loading capability:

  • Scratch-free products

Equipment loaner modules provided at no cost:

  • No downtime during servicing

Pre-set batch counts:

  • Efficient operation with minimal operator intervention

 


Low Cost Card Punching System with Spartanics M512 Plastic Card Punching System

Configure your M512 Plastic Card Punching System with 1-Up or 2-Up dies as the job and your production schedule require. At up to 165 strokes per minute, you get consistent precision registration accuracy in 3 axes (X, Y, Rotation) within +/- 0.1 mm or better.

The unique feature of re-registering in all 3 axes at every press stroke makes the M512 Plastic Card Punching System and all other M500 models the world’s highest precision blanking systems—within the two hairs’ width that the human eye can see. Registration precision does not get any better than this!

Long life male/female dies give you millions of hits and can be re-sharpened 18 to 20 times to give you millions of hits more. These are the world’s best value hard tools. You get the lowest cost per cut possible. For standardized male/female dies, you get quick delivery of emergency back up dies whenever needed.

Spartanics Universal Die Holder™ lets you interchange standard male/female tooling with progressive dies, compound dies, steel rule dies, and dies from any manufacturer.

Add to this die versatility, the M512 Plastic Card Punching System’s inherent design flexibility to efficiently interchange coil or sheet feed, and a wide array of output modules for a maximum efficiency in parts extraction.

Punching downtime becomes a thing of the past. Spartanics M512 Plastic Card Punching System modules can be easily removed for servicing and replaced with loaner modules provided by Spartanics at no cost.

Features & Benefits

Accommodates 1- Up or 2-Up dies:

  • Outputs up to 15,000 cards per hour

Electro-optical sensors scan registration marks at up to 165 strokes/minute:

  • Highest production outputs

Precise registration in X, Y, and Rotation axes with every press stroke:

  • Unsurpassed cut-to-print registration accuracy (+/- 0.1mm or better)

Accommodates wide variety of tooling options and tooling from all major manufacturers:

  • Utilizes steel rule dies, male/female hard tool dies, progressive hard tool dies, and compound hard tool dies–provides versitility to create simple or complex and multi-featured die designs

Modular design accommodates coil or sheet feed and a wide range of input and output mechanisms:

  • Flexibility for changing job requirements. Handles sheeted materials up to 250 mm (10”) x 840 mm (33”) and coiled materials up to 300 mm (12”)

Handles wide range of paper, plastic and metal materials:

  • Virtually unlimited capabilities to handle jobs for diverse markets

Computer storage of jobs and automatic re-positioning of steel rule dies:

  • Quick changeovers with minimal scrap

Multilingual and graphic icon touch screen:

  • Easy-to-use with minimal operator training

Extra long-life male/female dies:

  • Lowest cost per cut boosts bottom line

Superior edge quality from proprietary die designs:

  • Superior edge quality means lower costs from reduced rejects

Fully automated handling mechanisms for input and finished parts including the optional Magazine Loading capability:

  • Scratch-free products

Equipment loaner modules provided at no cost:

  • No downtime during servicing

Pre-set batch counts:

  • Efficient operation with minimal operator intervention

RFQ button

Comments are closed.

Quick Contact