Specialty Cards Produced with Spartanics Plastic Card Punching Systems . . Inspected with Spartanics Plastic Card Inspection System . . Counted with Spartanics Card Counters

Standard CR80 financial transaction cards can be punched with Spartanics Plastic Card Punching System; inspected with Spartanics Plastic Card Inspection Systems and counted on Spartanics Card Counters.

The plastic card punching system configuration for punching financial transaction cards will allow the user to insert a stack up to 18″ (45 cm) in height of plastic sheets 29″ x 30″ (73 cm x 76 cm) in the Autocutter for edge trimming and cutting into strips.

The cut strips will then be fed into the registration feed where it will be correctly positioned for registration, and then die cut. The die cut cards will fall through the die, and onto a card collection conveyor that will carry them out to the operator in a shingled fashion.

An optional module is available that can automatically insert the punched cards into cartridges as they finish their travel down the card collection conveyor.

A basic plastic card punching system for punching financial transaction cards consists of the following modules:

1. M95 Autocutter
2. Mechanical Punching Press
3. X,Y or X,Y & Rotation Axis Registration Feed
4. 1, 2, 3, 4, 5, 6, 8, 10-up Punching Die
5. Scrap Web Ejector
6. Multi-Lane Conveyor to match the punching die
7. Optional Module-Automatic loading of punched cards into cartridges
8. Optional Punching Die-Visa Mini Card layout
9. Optional Mini Die Holder & Die-A lower cost die module for producing CR80 cards

Loyalty Cards are a popular product that is generally manufactured from sheeted plastic that is punched and scored into a wide variety of shapes. Configurations from small CR80 size cards with multiple key tags up to cards that contain three CR80 cards.

The plastic card punching system configuration for punching loyalty cards will allow the user to insert a stack up to 18″(45 cm) in height of plastic sheets 29″ x 30″ (73 cm x 76 cm) in the Autocutter for edge trimming and cutting into strips.

The cut strips will then be fed into the registration feed where it will be correctly positioned for registration, and then die cut. The die cut cards will fall through the die, and onto a card collection conveyor that will carry them out to the operator in a shingled fashion.

If either a steel rule or a compound die is used, then a part extractor or a knock out must be used to remove the parts from the scrap web.

A basic plastic card punching system for punching loyalty cards consists of the following modules:

1. M95 Autocutter
2. Mechanical Punching Press
3. X,Y or X,Y & Rotation Axis Registration Feed
4A. 1, 2, 3, 4, 5, 6-up Steel Rule Die
4B. 1, 2, 3-up Modular Punching Die
4C. 1, 2, 3, 4, 5, 6, 8, 10-up Progressive Punching Die
4D. 1, 2, 3, 4, 5, 6, 8, 10-up Compound Punching Die
5. Scrap Web Ejector
6. Part Extractor or Knock out for Steel Rule Die and Compound Die only
7. Multi-Lane Conveyor to match the punching die

Comments are closed.

Contact Us

RFQ